|
|
|
|
|
Westfield MK 80 - Swing Away Grain Auger
|
MK Series Grain augers incorporate the pest farm-tested designs, engineering and materials. You can match a Westfield auger to take on your smallest or biggest grain handling chores with ease.
Labour Saving Hydraulic Lift
Single Cylinder Hydraulic Lift (available for MK80/MK100 51' to 81') Proven cylinder lift provides smooth, fast operation with minimal hydraulic requirements. Combined with the 'A' frame undercarriage, Westfield's design allows you to position your auger at the bin with safety and confidence from your tractor seat.
Undercarriage & Wheels
Heavy structural tubing and wide double square tube arched axle for stability on the 91'/111' models. The 61' and 71' models are heavy duty square tube with trussing. Heavy guage 15' wheels with sturdy 6 bolt cast iron hubs. Require 9.5L-15x8 ply or 11L-15x8 ply heavy duty tires.
Trussing
(available for MK80/MK100/MK130plus 51' to 81') Heavy duty cable trussing provides maximum support with full bin reach.
CV-PTO Shaft
All MK augers are equipped with an overload shear bolt. The CV-PTO shaft, assures smooth operation with vibration-free running, longer wear and constant high capacity grain flow.
Right Angle Drive -- Optional Equipment
Assist operation inlimited space situations. Allows a full arc on opposite side of tractor.
Flex Down Spout -- Optional Equipment
Directs grain flow - reduces spillage. Available in poly or galvanized metal.
Reverser Kit -- Optional Equipment
Ability to reverse all flighting and allows for quick and easy clean out. (shown with gaurds removed for clarity)
Standard Hopper -- Optional Equipment
Quickly switches to right or left hand operation. A vertical transport position provides for quick, easy cleanout.
Standard Hopper Angle Drive
A Westfield design constant velocity angle-drive replaces the u-joint in the redesigned feed hopper, eliminating the velocity fluctuation vibrations for smoother running and less stress on the drive train.
Safety Discharge -- Optional Equipment
Spring loaded safety discharge door on the intake hopper gaurds against main auger overloading.
Hydraulic Hopper Drive -- Optional Equipment
A hydraulic drive with a powerful high torque hydraulic motor is available on the 8" and 10" models as a factory order. * 5" rubber extension - holds more grain while reducing spillage. * Handy boot clean out and service access doors.
PowerSwing -- Optional Equipment
This hydraulic swing-hopper mover fits low profile and regular swing-hoppers.
Corn Screen -- Optional Equipment
Up to 4' long. Available on all models. Factory installed on the swing hopper tube.
-
"A" frame design for maximum stability.
- Available in 51',61',71',81' and 91' lengths.
- Capacity is up to 3,900 bu/hr (106 metric tonnes/hr).
- Choice of mechanical or hydraulic swing auger drives on 8" and 10" models.
- Equipped with heavy duty constant velocity (CV) PTO shaft to eliminate vibrations for smoother running and less stress on the drive train.
- Extendable axles on 81' models (112" when retracted).
- Flared lower tube for improved feeding with replaceable 14" flight section.
- Spring loaded safety discharge door on intake hopper guards against main auger overloading.
- Trussing provides maximum support with full bin reach.
- Wear Edge flighting at critical grain transfer points.
|
|
Westfield MK 100 - Swing Away Grain Auger
|
MK Series Grain augers incorporate the pest farm-tested designs, engineering and materials. You can match a Westfield auger to take on your smallest or biggest grain handling chores with ease.
Labour Saving Hydraulic Lift - Single Cylinder
Single Cylinder Hydraulic Lift (available for MK80/MK100 51' to 81') Proven cylinder lift provides smooth, fast operation with minimal hydraulic requirements. Combined with the "A" frame undercarriage, Westfield's design allows you to position your auger at the bin with safety and confidence from your tractor seat.
Undercarriage & Wheels
Heavy structural tubing and wide double square tube arched axle for stability on the 91'/111' models. The 61' and 71' models are heavy duty square tube with trussing. Heavy guage 15" wheels with sturdy 6 bolt cast iron hubs. Require 9.5L-15x8 ply or 11L-15x8 ply heavy duty tires.
Labor Saving Hydraulic Lift - Dual Cylinder
Dual Cylinder Hydraulic Lift (available for MK100 91'/MK130plus 61' to 111') Requires minimal amount of tractor hydraulic fluid to raise auger. Shut-off valve in hydraulic line locks auger in position.
Trussing
(available for MK80/MK100/MK130plus 51' to 81') Heavy duty cable trussing provides maximum support with full bin reach.
CV-PTO Shaft
All MK augers are equipped with an overload shear bolt. The CV-PTO shaft, assures smooth operation with vibration-free running, longer wear and constant high capacity grain flow.
Trussing - MK100 / MK130 Plus
(available for MK100/MK130plus 91' to 111') X-braced top mounted pipe and heavy duty side-cable trussing provides maximum support with full bin reach. Heavy 1/4" angle track adds further support.
Right Angle Drive -- Optional Equipment
Assist operation inlimited space situations. Allows a full arc on opposite side of tractor.
Reverser Kit -- Optional Equipment
Ability to reverse all flighting and allows for quick and easy clean out. (shown with gaurds removed for clarity)
Flex Down Spout -- Optional Equipment
Directs grain flow - reduces spillage. Available in poly or galvanized metal.
Standard Hopper -- Optional Equipment
Quickly switches to right or left hand operation. A vertical transport position provides for quick, easy cleanout.
Low Profile Hopper -- Optional Equipment
Self leveling low profile hopper available for 10" and 13" series only.
Standard Hopper Angle Drive -- Optional Equipment
A Westfield design constant velocity angle-drive replaces the u-joint in the redesigned feed hopper, eliminating the velocity fluctuation vibration for smoother running and less stress on the drive train.
Safety Discharge -- Optional Equipment
Spring loaded safety discharge door on the intake hopper gaurds against main auger overloading.
Hydraulic Hopper Drive -- Optional Equipment
A hydraulic drive with a powerful high torque hydraulic motor is available on the 8" and 10" models as a factory order. - 5" rubber extension - holds more grain while reducing spillage. - Handy boot clean out and service access doors.
PowerSwing -- Optional Equipment
This hydraulic swing-hopper mover fits low profile and regular swing-hoppers.
Corn Screen -- Optional Equipment
Up to 4' long. Available on all models. Factory installed on the swing hopper tube.
-
"A" frame design for maximum stability.
- Available in 51',61',71',81' and 91' lengths.
- Capacity is up to 6,000 bu/hr.
- Equipped with heavy duty constant velocity (CV) PTO shaft to eliminate vibrations for smoother running and less stress on the drive train.
- Extendable axles on 81' models (112" when retracted).
- Flared lower tube for improved feeding with replaceable 14" flight section.
- Spring loaded safety discharge door on intake hopper guards against main auger overloading.
- Trussing provides maximum support with full bin reach.
- Wear Edge flighting at critical grain transfer points.
|
|
Westfield MK 130plus Grain Auger
|
MK Series Grain augers incorporate the pest farm-tested designs, engineering and materials. You can match a Westfield auger to take on your smallest or biggest grain handling chores with ease.
Lift Assist
(available for MK130plus 81' to 111') Multi roller track shoe reduces the pressure needed to raise the auger and provides for a lower transport position.
Undercarriage & Wheels
Heavy structural tubing and wide double square tube arched axle for stability on the 91'/111' models. The 61' and 71' models are heavy duty square tube with trussing. Heavy guage 15" wheels with sturdy 6 bolt cast iron hubs. Require 9.5L-15x8 ply or 11L-15x8 ply heavy duty tires.
Labor Saving Hydraulic Lift - Dual Cylinder
Dual Cylinder Hydraulic Lift (available for MK100 91'/MK130plus 61' to 111') Requires minimal amount of tractor hydraulic fluid to raise auger. Shut-off valve in hydraulic line locks auger in position.
Trussing
(available for MK80/MK100/MK130plus 51' to 81') Heavy duty cable trussing provides maximum support with full bin reach.
CV-PTO Shaft
All MK augers are equipped with an overload shear bolt. The CV-PTO shaft, assures smooth operation with vibration-free running, longer wear and constant high capacity grain flow.
Trussing - MK100 / MK130 Plus
(available for MK100/MK130plus 91' to 111') X-braced top mounted pipe and heavy duty side-cable trussing provides maximum support with full bin reach. Heavy 1/4" angle track adds further support.
Extendable Axles
(available for MK 100/MK130plus 81') 32" of axle extension for increased stability. Retraction offers reduced width for transport.
Thrust Adjuster
Upper bearing thrust adjuster allows flighting pressure to be equalized on both upper and lower bearings for smoother operation, longer flight life.
Right Angle Drive -- Optional Equipment
Assist operation inlimited space situations. Allows a full arc on opposite side of tractor.
Reverser Kit -- Optional Equipment
Ability to reverse all flighting and allows for quick and easy clean out. (shown with guards removed for clarity)
1000 PTO Drive -- Optional Equipment
Optional on MK 130Plus models. Allows operation with high horsepower tractors - reverser included.
Flex Down Spout -- Optional Equipment
Directs grain flow - reduces spillage. Available in poly or galvanized metal.
Standard Hopper -- Optional Equipment
Quickly switches to right or left hand operation. A vertical transport position provides for quick, easy cleanout.
Low Profile Hopper -- Optional Equipment
Self leveling low profile hopper available for 10" and 13" series only.
Standard Hopper Angle Drive -- Optional Equipment
Westfield designs a constant velocity angle-drive to replace the u-joint in the redesigned feed hopper, eliminating the velocity fluctuation vibration for smoother running and less stress on the drive train.
PowerSwing -- Optional Equipment
This hydraulic swing-hopper mover fits low profile and regular swing-hoppers.
Safety Discharge -- Optional Equipment
Spring loaded safety discharge door on the intake hopper guards against main auger overloading.
Hydraulic Hopper Drive -- Optional Equipment
A hydraulic drive with a powerful high torque hydraulic motor is available on the 8" and 10" models as a factory order. * 5" rubber extension - holds more grain while reducing spillage. * Handy boot clean out and service access doors.
Corn Screen -- Optional Equipment
Up to 4' long. Available on all models. Factory installed on the swing hopper tube.
-
1/4" flighting on main and sing augers, with additional 10 gauge wear-edge strip welded at critical grain transfer points for increased durability.
- 61', 71', and 81' utilize heavy duty galvanized truss cables with x-braced brackets to provide maximum support with full bin reach.
- 91' and 111' utilize a combination of 2 1/2" or 3" steel tubing and heavy duty galvanized truss cables to provide ultimate strength and support at all times.
- Capacity is up to 9,600 bu/hr (261 metric tonnes/hr).
- Heavier duty gear boxes and extended lube universal joints for longer, trouble free operation.
- Heavy gauge 15" wheels with sturdy 6 bolt cast iron hubs and tapered bearings.
- Larger hopper wheels with pneumatic tires and tubes.
- New 1000 RPM-540 RPM reducer with built in reverser that will now bolt onto the auger instead of the tractor. Eliminates bottom, bearings, chain, sprockets and optional reverser kit when used.
- Our 81' size is designed with extendable axles which offers stability at the bin site and narrow transport width. (112" when retracted).
- Transport to operation procedures are smooth and dependable with rugged double angle iron track, reinforced stress points and large multi roller trackshoe.
|
|
|
